Tube Punching Machine

Tube Punching Machine

SR-TBC-1500 / 2500

Tubocop 1500 is a standard Machine that processes pre-cut to length copper tubes with the following specifications:

SR-TBC-1500 / 2500

Tubocop 1500 is a standard Machine that processes pre-cut to length copper tubes
with the following specifications:
Min external diameter: 16mm
Max external diameter: 35mm (Up to 35mm - can go higher depending on wall thickness and material – with optional extra enhanced punching system).
Max Wall thickness: 1.00mm (Up to 1.5mm depending on tube OD with optional extra enhanced punching system).
Max Tube length: 1,500mm
Tube material: Semi-hard copper (280 - 320 N mm2 ⁄ Tensile strength)

SR TBC 2500 right

Operation Description

The operator loads manually pre-cut to length copper tubes into the magazine of the machine and initiate the operation of the machine. Thereafter all processing steps are completed automatically. The machine moves the tubes from the magazine into the corresponding tube supporting system then the gripping system retains the tube into position and drives it into the punching tool. At this point the punching starts; the tool completes the first punching then move the tube to the next punching point and punches the tube again. This cycle is repeated until all holes have been punched. As final step the machine removes the tube from the punching tube and quickly unloads it in the finished product magazine. Once this magazine is full (500 tubes capacity); the operator manually unloads the tubes from the magazine of finished products and stores them away.

The operator can input, through the control panel touch screen, the following variables:

  • Number of riser holes
  • Riser hole pitch
  • Distance of first hole from tube end (60mm minimum)
  • Tube length

SR TBC 2500 parallax

SR TBC 2500 left

Technical

Characteristics

The machine meets the prerequisites of CE marking and consists of:

  • Tube separate and feeding unit
  • Tube forwarding and positioning unit, servomotor driven
  • Pneumatic punching unit
  • Possible from Φ6mm up to Φ15mm (subject to compatibility with the OD)
  • Magazine of 50 (fifty) cut to length tubes
  • Magazine of up to 500 (five hundred) finished products
  • Control managed by PLC: Omron integrated with keyboard

Characteristics of the N.C

  • Program editor
  • Diagnostic alarm
  • Number of pieces counter
  • Self-power shut-down at the program end with programmable time
  • Easy settings
  • Serial connection with PC: type RS 232
  • Touch screen DA 5.7” TFT 65000 colours with icons
  • Protections IP65

PLC I/O

  • Safety Covers
  • Tolerance Repeatability: ± 0,2mm
  • Production Performance(L=2500 mm, Step=110mm): 120 Pcs/hour
  • Production Performance(L=1300 mm, Step=110mm): 240 Pcs/hour
  • Voltage: 400 V/ 50 H
  • Total Installed Power: 1.0 KW
  • Working Pressure: 6 Bar
  •  Pressure Air consume: 300 lt/min
  • Machine Weight: 400 Kg
  • Productivity: 3 – 4 tubes/min

Gallery

xaraktiristika eikonas
xaraktiristika eikonas
xaraktiristika eikonas
xaraktiristika eikonas
xaraktiristika eikonas
xaraktiristika eikonas
xaraktiristika eikonas